Olatu

  • Hybrid cold
  • Highest % humidity in a traditional open shop window
  • 90 cm of exposure on 2 levels
  • Temperature range:Between -18 and +12
  • Humidity range:Between 75% and  90%
  • Optional nebulization system to increase humidity to 95%

Olatu

  • Hybrid cold
  • Highest % humidity in a traditional open shop window
  • 90 cm of exposure on 2 levels
  • Temperature range:Between -18 and +12
  • Humidity range:Between 75% and  90%
  • Optional nebulization system to increase humidity to 95%
  • 90 cm internal capacity / external depth: 1.25 – 1.30 m
  • We make 100% handcrafted display cases that adapt to the architecture of your premises.
  • We can decorate it with any material so that the display case is fully integrated into your project and remains hidden, thus giving a central place to the products displayed. We can look at your premises  and you can be secure in the knowledge that the service you receive will be of the highest quality
  • This cooling system  achieves the highest percentage of humidity in an open display case.
  • Vertical evaporator (static cold) of 520 W / F per meter.
  • We use 10% of the evaporator to cool the bottom of the display case (contact cold).
  • Unlike ventilated systems, we “attract” air by creating a depression in the front of the window.
  • At the front (less aggressive cold) we absorb at a maximum speed of 0.3 m / s.
  • At the rear (more aggressive cold) the maximum speed is 0.2m / s.
  • Fan speed control via parameters related to the electronic valve, temperature and defrost.
  • Hybrid cold combines the strengths of each cold and eliminates the weaknesses they have separately
  • For soft cheeses, a humidity control of around 85% to 95% is necessary.
  • Humidity control in a fully open display case is virtually impossible. Air flows are created by opening the doors, making it impossible to maintain humidity within the optimal settings for soft cheeses.
  • To solve this problem, you can add a nebulization system on the display case.
  • With our water nebulization system, even with a fully open display case, we control the humidity in the 85% to 90% range required for soft cheese.
  • We manufacture fiberglass using techniques from the shipbuilding industry.
  • We create a sandwich and laminate an iron exoskeleton inside which transforms it into a structural part.
  • We inject the interior with two-component high-density polyurethane. The result is a structural part without the need for welds, joints or right angles.
  • For large and / or corner display cases, we transport them in different parts and perform polyester welding at the customer’s site. Once the “welding” is done, we perform a leak test This also comes with a 10 year warranty.
  • Online monitoring system
  • The showcase is connected to the technical service of Cruz Cool Tech and
  • we monitor it with 5 probes (Air inlet, air outlet, evaporator inlet, evaporator outlet and fans).
  • The software performs continuous mapping and in the event of an anomaly sends an alarm to our technical service. He accesses the software to perform a verification. If possible, we offer a solution via software. Otherwise, we call you and plan an intervention via your refrigeration specialist or directly with Cruz Cool Tech. Our customers always have the full support of our technicians if any problems may arise.
  • 5.5 inch touch pad.
  • Control of temperature, humidity, fan speed and status of the electronic valve.
  • Direct access to temperature and humidity graphs.
  • Fan speed control via parameters related to the electronic valve, temperature and defrost.
  • COOLPLUS software connected to the technical service of CRUZ COOL TECH.
  • Thanks to the hybrid cooling system, the digital control system and the COOLPLUS software, we guarantee maximum temperature stability in an open display case.
  • With the fiberglass sandwich, we guarantee maximum thermal insulation
  • We adapt the air speed to the type of product, the time of sale and the state of the refrigeration system (pressure, temperature, defrost).
  • 100% water jet cleaning
  • The entire display case can be cleaned with pressurized water.
  • 90 cm internal capacity / external depth: 1.25 – 1.30 m
  • We make 100% handcrafted display cases that adapt to the architecture of your premises.
  • We can decorate it with any material so that the display case is fully integrated into your project and remains hidden, thus giving a central place to the products displayed. We can look at your premises  and you can be secure in the knowledge that the service you receive will be of the highest quality
  • This cooling system  achieves the highest percentage of humidity in an open display case.
  • Vertical evaporator (static cold) of 520 W / F per meter.
  • We use 10% of the evaporator to cool the bottom of the display case (contact cold).
  • Unlike ventilated systems, we “attract” air by creating a depression in the front of the window.
  • At the front (less aggressive cold) we absorb at a maximum speed of 0.3 m / s.
  • At the rear (more aggressive cold) the maximum speed is 0.2m / s.
  • Fan speed control via parameters related to the electronic valve, temperature and defrost.
  • Hybrid cold combines the strengths of each cold and eliminates the weaknesses they have separately
  • For soft cheeses, a humidity control of around 85% to 95% is necessary.
  • Humidity control in a fully open display case is virtually impossible. Air flows are created by opening the doors, making it impossible to maintain humidity within the optimal settings for soft cheeses.
  • To solve this problem, you can add a nebulization system on the display case.
  • With our water nebulization system, even with a fully open display case, we control the humidity in the 85% to 90% range required for soft cheese.
  • We manufacture fiberglass using techniques from the shipbuilding industry.
  • We create a sandwich and laminate an iron exoskeleton inside which transforms it into a structural part.
  • We inject the interior with two-component high-density polyurethane. The result is a structural part without the need for welds, joints or right angles.
  • For large and / or corner display cases, we transport them in different parts and perform polyester welding at the customer’s site. Once the “welding” is done, we perform a leak test This also comes with a 10 year warranty.
  • Online monitoring system
  • The showcase is connected to the technical service of Cruz Cool Tech and
  • we monitor it with 5 probes (Air inlet, air outlet, evaporator inlet, evaporator outlet and fans).
  • The software performs continuous mapping and in the event of an anomaly sends an alarm to our technical service. He accesses the software to perform a verification. If possible, we offer a solution via software. Otherwise, we call you and plan an intervention via your refrigeration specialist or directly with Cruz Cool Tech. Our customers always have the full support of our technicians if any problems may arise.
  • 5.5 inch touch pad.
  • Control of temperature, humidity, fan speed and status of the electronic valve.
  • Direct access to temperature and humidity graphs.
  • Fan speed control via parameters related to the electronic valve, temperature and defrost.
  • COOLPLUS software connected to the technical service of CRUZ COOL TECH.
  • Thanks to the hybrid cooling system, the digital control system and the COOLPLUS software, we guarantee maximum temperature stability in an open display case.
  • With the fiberglass sandwich, we guarantee maximum thermal insulation
  • We adapt the air speed to the type of product, the time of sale and the state of the refrigeration system (pressure, temperature, defrost).
  • 100% water jet cleaning
  • The entire display case can be cleaned with pressurized water.